Quick Change In-Line Filtration System

$118.00

Share
SKU: FF6000 Category:

Enjoy the taste, convenience and health benefits of filtered water from your existing tap, plumbed directly to your cold water line with a compact design

Also available in your local Bunnings.

Click here to find your nearest Bunnings store.

Click here to view our product videos.

Previously named Full Flow Inline System

Please ensure the pressure limiting valve supplied with this water filtration system is fitted during installation.
Installation must comply with existing state or local plumbing regulations.  Refer to warranty terms and conditions for full details.

The system should only be used on water that is microbiological safe- that is water has been adequately chlorinated or disinfected.

Maximum pressure: 862kPa (125psi)

Minimum pressure:  69kPa (10psi)

Maximum temperature of 40 degree Celsius

Min temp. 4C. Protect from freezing & direct sunlight.

RECOMMENDATION: If the undersink water filtration system has not been used for 2 or more days, you will need to flush 5 to  10 litres of water through the system before using the water. If the unit is to be left unused for more than 2 days, the water supply valve must be turned off.

Performance

1 Micron easy change ultra fine carbon filter is included, Replacement cartridge product code: FF6001

Reduce chlorine, taste & odour

5.4Ltr per minute flow rate

To ensure maximum quality and performance replace cartridge every 6 months (7500L); results can vary depending on water quality in area and may require earlier filter change.

Variation

, ,